Herunterladen Inhalt Inhalt Diese Seite drucken

Remote Control - Cilio VENTO PLUS 45 Bedienungsanleitung

Standventilator
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Use
Keep the device in good condition. Make sure that the moving parts are not blocked and all parts are in perfect
condition.
Before each use, check that the device's grille is properly attached and free of dust, dirt, etc.
Do not use the device when it is tilted or upside down and only with the base plate attached.
· Place the fan on a flat and stable surface. Use a suitable pad for sensitive surfaces.
· Ensure sufficient free space above and near the appliance to avoid overheating. Never cover it!
· Unwind the cable completely and connect the device to the mains. A short signal tone sounds and the current
room temperature is displayed.
· The fan can be operated using the remote control and the control buttons on the stand.

Remote control

· Before using the remote control for the first time, open the battery compartment, remove the safety strip and
close the battery compartment.
· To replace the battery, open the battery compartment and insert 1 battery (type CR2025 3V). Pay attention to
the +/- markings.
14

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Cilio VENTO PLUS 45

Inhaltsverzeichnis