Troubleshooting; Technical Data - Kress Commercial KAC840 Bedienungsanleitung

place. (See Fig. A)
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
A
2. If there is dust on the windshield, please use a
tool to lift one side of the windshield, remove the
windshield, and rinse with clean water. (See Fig. B)
B
TROUBLE SHOOTING
Problems Causes
The charger Defective
doesn't work charger.
All LED lights
go out
The charger
doesn't work
and LED light
flashes red.
a
The charger
doesn't work
and red LED
light is on.

TECHNICAL DATA

Rated Input
voltage
Output voltage
Charging current
Rated Input power
Charge battery
Degree of
protection
Charging
time (approx.)
(Cyberpack)
Protection class
Machine weight
Charging time varies with different temperature. For
the technical data of the types, the number of cells
and the rated capacity of the batteries that can be
Solutions
charged, please refer the nameplate of the battery
Please take back
pack supplied by Kress.
to an authorized
Kress Dealer
Please replace
PLUG REPLACEMENT
it with the new
one.
(ONLY FOR REWIRABLE
PLUG OF UK & IRELAND)
If you need to replace the fitted plug then followthe
instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue – Neutral
Battery pack is Allow the
too cold or too battery pack to
hot. reach normal
temperature and
charging.
Kress 60V
Battery:
0
2 C~48
0
(36 F~118
Cyberpack:
0
-8 C~53
0
(18 F~127
Battery pack Please return to
is broken or an authorized
connection error. Kress Dealer.
Please replace
it with the new
one.
220-240 V/50~60 Hz
4.0 Ah (1pc)
4.0 Ah (2pcs)
11.0Ah (1pc)
11.0 Ah (2pcs)
0
C
0
F)
0
C
0
F)
60 V d.c
30 A
1800 W
EN
Li-Ion
IPX5
12 mins
24 mins
25 mins
50 mins
/II
11.8 kg
7