Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TIPS
If the remote control is not working, check ...
1. ... whether the battery has been inserted correctly.
2. ... whether the battery is empty; if the battery is empty, please replace it with an
equivalent battery.
• Avoid getting the battery contacts wet.
• Do not install the wireless socket in the immediate vicinity of transformers as these can
affect the wireless connection.
• Please do NOT exceed the maximum values (please refer to the specifications).
• If possible, do not use the wireless socket for devices with a high switch-on voltage (motors,
etc.).
If you cannot detect a perceptible noise, the wireless socket is not connected to
the remote control. Please repeat the "Commissioning" procedure.
1. ... whether the selected socket is working properly.
2. ... whether the wireless unit is connected.
3. ... whether the device to be connected is functional.
4. ... whether the inserted device is switched on - assuming it has an ON/OFF switch.
MAINTENANCE
The device is maintenance-free, so please do not open the device. You will invalidate your
warranty if you open up the device. Clean the outside with a soft, dry cloth or a brush.
Do not use any cleaning products that contain carbonic acid, benzene, alcohol or similar
substances. Such substances attack the surface of the device and their vapours are also
hazardous to health and explosive. Do not use any sharp-edged tools, screwdrivers, wire
brushes or similar to clean the device.
- 4 -
Werbung
Inhaltsverzeichnis
