Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before Using for the First Time
Safety Notes
• Only for operation in dry spaces
• Operating temperature +5° Celsius to +50° Celsius /
+41° Fahrenheit to +122° Fahrenheit
Information about High Frequency
(RF) Exposure
The radiated output power of this wireless device is
below the Industry Canada (IC) limits for high frequen-
cy exposure. This wireless device should be used so
that that the potential for human contact is minimized
during normal operation. This device has also been
rated and it ful lls the IC limits for HF exposure under
mobile exposure conditions. (Antennas should be
more than 20 cm / 8" from your body).
• Wi-Fi 802.11 b/g/n
• TX Power +16 dBm
• RX Sensitivity -95.5 dBm
Intended Use
The Mobile Station WLAN is a control device for
model railroads of different gauges. It may only be
used in dry areas.
General Notes
• Use a damp cloth to clean this device. Do not use
strong cleansers or scouring agents. This device
may not have any voltage present during cleaning.
• The operating instructions are a component part
of the product and must therefore be kept in a
safe place as well as be transferred along with the
product to any third party.
• Disposal:
www.maerklin.com/en/imprint.html
Functions
• The Mobile Station WLAN is a controller for the
operation of a digital model railroad layout.
• The Mobile Station WLAN supports the digital proto-
cols fx (MM), mfx, and DCC adhering to NMRA/NEM.
• Running a locomotive: mfx, MM (addresses 1 – 255),
DCC (addresses 1 – 10,239)
• Programming a locomotive
• Switching solenoid items (addresses 1 – 320)
Restrictions
By itself, the Mobile Station WLAN is not suf cient to
control a model railroad. The 60117 WLAN Receiver
Box with a 60114/60116 Track Box, or a Central Station
2 or Central Station 3, which is operated in a suitable
network (with available WLAN), are absolutely
required.
About These Instructions
These instructions refer to Software Version 4.0.0.1.
The Mobile Station WLAN is provided at regular in-
tervals with updates. These updates can also change
the range of functions for the device. The differences
of newer software versions to the one described here
will however be slight. Accordingly, new instructions
are not generated for each software version.
In the interest of clarity, we will dispense here with
explaining all points down to the last step. Rather, we
will show only how the points are found and called up.
Disposal
Notes about environment protection: Products iden-
ti ed with a trashcan with an „X" through it may not
be disposed of at the end of their useful life with the
normal household trash. Rather, they must be taken
to a collection point for the recycling of electrical and
electronic devices. The symbol on the product, the
operating instructions, or the packaging indicates
this. The materials in these products are reusable
according to their identi cation. Help us protect the
environment and preserve resources, and take this
device free of charge to the appropriate recycling
locations/dealers. The organization responsible for
trash separation or your specialty dealer can answer
questions about this.
www.maerklin.com/en/imprint.html
11
Werbung
Inhaltsverzeichnis
