Personal Safety; Device Use; Cleaning And Maintenance - Royal Catering Rcwi-33L Bedienungsanleitung

b) If you discover damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
c) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
d) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
f) Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
g) Keep packaging elements and small assembly parts in
a place not available to children.
h) Keep the device away from children and animals.

2.3. PERSONAL SAFETY

a) The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
b) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
c) The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b) Make sure the plug is disconnected from the socket
before attempting any adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
c) Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
h) Clean the device regularly to prevent stubborn grime
from accumulating.
i) The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
j) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
8
k) Keep the device away from sources of fire and heat.
l) Do not overload the device.
m) Do not cover the ventilation openings!
n) Under no circumstances should the housing be
opened.
o) Do not store heavy, poisonous or corrosive objects in
the device.
p) In order to avoid damaging the compressor during
transport, the fridge should not be tilted by more than
45°.
q) Do not use the fridge in unheated rooms and in
locations with high air humidity.
r) There is a risk of a child getting stuck inside the
device. Before storing the device withdrawn from use,
it is necessary to dismantle the door and to leave the
shelves in their place, so that children cannot easily
enter the interior.
s) Do not use mechanical devices to accelerate the
process of cooling!
t) Do not use any electrical appliances inside the cooler
other than those specified by the manufacturer.
u) It is a free-standing device, and is not suitable to be
built into cabinets, used in campers or RVs, it does not
co-operate with inverters.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is designed to store beverages in closed
containers at appropriate temperatures. The product is
intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
RCWI-33L
5
1
2
3
6
4
Rev. 01.12.2020
RCWI-20L
5
1
2
6
3
4
1. Control panel
2. Interior light
3. Beverage shelf
4. Adjustable foot
5. Door hinge
6. Door with a display window
7. Water tank - on the bottom of the device
(not shown in the picture)
3.2. PREPARING FOR USE
APPLIANCE LOCATION
Temperatura otoczenia nie może przekraczać zakresu 16-
32°C a wilgotność względna nie powinna przekraczać 85%.
Ensure good ventilation in the room in which the device is
being used. There should be at least 10 cm distance between
each side of the device and the wall or other objects. The
device should always be used when positioned on an even,
stable, clean, fireproof and dry surface, and be out of the
reach of children and persons with limited mental and
sensory functions. Position the device such that you always
have access to the power plug. The power cord connected
to the appliance must be properly grounded and correspond
to the technical details on the product label. The ambient
temperature must not exceed the range of 16-32 ° C and
the relative humidity must not exceed 85%. Before the first
use, remove all accessories and wash them. Wash the device
inside and dry it thoroughly.
ASSEMBLING THE APPLIANCE
After transporting the device, leave it for approx. 2 hours
before connecting it to the power supply.

3.3. DEVICE USE

3.3.1. CONTROL PANEL
The control panel is located at the front in the upper part
of the device.
RCWI-33L
1 2 3 4 5
Rev. 01.12.2020
RCWI-20L
1 2 3 4
1. Cooler interior lighting on/off button (press to turn on
or off the light)
2. Temperature unit change button (press to change
from degrees Celsius to degrees Fahrenheit and vice
versa; the selected temperature unit will be shown on
the right side of its value on the display)
3. Display of the current temperature inside the cooler
and temperature unit display
4/5. The button for increasing/decreasing temperature
within available range (press the appropriate button
to increase or decrease the temperature)
PLEASE NOTE: When first started, there may be an
unpleasant smell inside the cooler. This is normal and
is not a defect of the device! Over time, the unpleasant
smell should disappear. The device takes time to cool
the beverages to the right temperature. Meanwhile,
avoid opening the cooler door frequently and avoid
placing extra or new bottles in the refrigerator.
The time to reach the set temperature inside the
device depends on ambient temperature, the initial
temperature of the beverage, its quantity, and the
arrangement inside the device. It may be extended if
you turn the cooler on for the first time or if it hasn't
been used for a long time.

3.4. CLEANING AND MAINTENANCE

a) Unplug the mains plug and allow the device to cool
completely before each cleaning, adjustment or
replacement of accessories, or if the device is not
being used. Wait for the rotating elements to stop.
b) Use only non-corrosive cleaners to clean the surface.
c) Use only mild, food-safe detergents to wash the
device.
d) After cleaning the device, all parts should be dried
completely before using it again.
e) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f) Do not spray the device with a water jet or submerge
it in water.
g) Do not allow water to get inside the device through
vents in the housing of the device.
h) Clean the vents with a brush and compressed air.
i) Use a soft, damp cloth for cleaning.
j) Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
k) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
l) If the device is not used for a period longer than 3
weeks, empty it of its contents, turn it off, disconnect
the cable from the power source and leave the
door slightly open to prevent the accumulation of
moisture, mould and unpleasant odours.
5
9