Print Function - ratiotec RS 2000 Bedienungsanleitung

Change (float) function (RS 1200)
The Float function allows you to leave a certain amount of money in the cash register for the next day or the next
user. To activate or adjust Float, you must select the Float function in the SETUP menu. Use the ARROW buttons
to set the exact Float amount or to deactivate the function. You can select any Float amount between 0 and 500
in steps of 5. The default Float amount is 0. Save the desired amount by pressing the +/OK button. If the Float
function is activated, counting starts with a negative value, i.e. with the selected Float sum (if the Float value is
50, counting starts at -50). The weighed coins and notes are added to the negative starting value. Activating the
Float function deactivates the use of the Reference weighing.
Pressing the INFO button briefly takes you to the change overview.
By pressing and holding the INFO button, you can temporarily hide the Float function in the counting process.

Print function

A print-out is possible using the optionally available RTP 300 thermal receipt printer. If a receipt printer is
connected to the printer connection of the banknote counter, a receipt can be printed by holding the OK button.
0.00
Quantity Unit /Reference
0 0.01
x
Amount /Sum
-10.00
EUR
pRINTING
EN
19