Charging The Headphones; Basic Functions - Metz KH-BT03 Bedienungsanleitung

1 Charging the headphones

Before using the headphones for the first time, they should be charged for at least 1 hour
using the enclosed USB charger and cable.
During charging, the LED indicator lights up red. When the battery is charged,
the LED indicator lights up blue.
The battery can be charged in 15 minutes for an operating time of approx. 1.5 hours.
The running time of a fully charged battery in music playback mode is approx. 25 hours in
music playback mode, approx. 12,5 hours with ANC mode activated.

2 Basic functions

2.1 Switch headphones on/off
• Press the on/off button
the headphones switch on and indicate "Power on".
• Press the on/off button
the headphones switch off and indicate "Power off".
+
The ANC function remains active even after the
headphones are switched off and drains power
from the battery. Switch off the ANC function.
2.2 Switch ANC on/off
The ANC function reduces ambient noise.
• Slide the ANC switch upwards and switch on the ANC
mode.
The green LED lights up.
• Slide the ANC switch down and switch off the ANC
mode.
for approx. 3 seconds,
for approx. 3 seconds,
11
On/Off button