Avalla S-80 Bedienungsanleitung Seite 3

Quick start guide
Hose connection and setup
Place the unit on a level surface with at least 50cm of free space
around it, to allow good air circulation. Allow the unit to stand
upright for at least 24 hours after delivery or being stored on its side.
Warning: Do not operate near combustible or explosive
materials, heat sources, or any objects that may block air inlet
and outlet. Keep the air inlet and outlet free of obstacles. Only use
in rooms that exceed the size stated on the unit rating plate.
Attach the hose connector to one end of the
exhaust hose.
If using the window kit, attach the windows kit
adapter to the other end of the exhaust hose.
Insert the fastening clasp into the window kit
and secure with washer and wingnut.
Extend the window kit to the height of your
window. Attach the exhaust hose to the
window kit.
Close your window to secure the window kit in
place.
Attach the hose connector to the air exhaust
on the unit, then connect to a mains power
supply and turn the unit on.
03