SOLIS COOL AIR 7587 Schnellstartanleitung Seite 19

U S I N G T H E A P P L I A N C E
V
Never change the position of the horizontal louvres when
6
the appliance is switched on.
The position of the horizontal louvres can be changed manually. To do this, use the lever at the left
4
side of the middle louvre.
A relative humidity of 40-50% is recommended while using the appliance.
4
1. Press the ON/OFF button to switch on the appliance. The appliance switches on at medium
a
speed and then switches to low speed. The corresponding speed indicator
Press the ON/OFF button
2. to switch off the appliance.
a
If the appliance is not switched off manually, the appliance automatically switches off after 12 hours.
S E T T I N G T H E FA N S P E E D
V
The appliance has three fan speed settings; low, medium and high. To change the speed of the fan:
Press the SPEED button to change the speed of the fan. The corresponding speed indicator
1.
s
lights up.
U S I N G T H E D I M M E R F U N C T I O N
V
To use the dimmer function with the control buttons:
1. Press the MODE button to switch on the dimmer function. The dimmer light
g
other light elements switch off. After 3 seconds the dimmer light switches off.
2. Press the MODE button to switch off the dimmer function. The light elements switch on again.
g
To use the dimmer function with the remote control:
Press the LIGHT button to switch on the dimmer function. The dimmer light
1.
j
After 3 seconds the dimmer light switches off.
Press the LIGHT button
2. to switch off the dimmer function. The light elements switch back on.
j
U S I N G T H E C H I L D LO C K
V
To use the child lock function with the control buttons:
Press the MODE button
1. for 2 seconds to switch on the child lock function. The buttons of the
g
appliance and the remote control are now locked. The child lock light
5
2. Press the MODE button for 2 seconds to switch off the child lock function. The buttons of the
g
appliance and the remote control are active again.
5
To use the child lock function with the remote control:
1. Press the MODE button to switch on the child lock function. The buttons of the appliance and
g
the remote control are now locked. The child lock light
5
2. Press the MODE button to switch off the child lock function. The buttons of the appliance and
g
the remote control
are accessible again.
5
U S I N G T H E O S C I L L AT I O N F U N C T I O N
V
Press the OSC button to switch on the oscillation function. The vertical louvres on the air
1.
d
outlet swivel back and forth. The oscillation light
4
U S I N G T H E T I M E R F U N C T I O N
V
1. Press the TIMER button to switch on timer function. The LED display
f
icon.
32
switches on.
y
y
switches on. All
j
switches on.
o
lights up.
i
lights up.
i
lights up.
u
shows 0 and a clock
1
Press the TIMER button
2. multiple times to adjust the timer. The maximum timer setting is 8 hours.
f
When the LED display
3. shows 0, the timer deactivates.
f
U S I N G T H E CO O L F U N C T I O N
V
1. Press the COOL button to switch on the cool function. The cool light
h
pump starts.
If, when the cooling function is activated, the water level drops below approx. 1/4 of the tank, a
4
warning signal sounds. The cooling function switches off and the appliance continues to run without
the cooling function.
When the water tank is empty, the pump switches off after 15 seconds. The appliance beeps three
4
times and the COOL indicator dims.
To switch off the coolfunction, press the COOL button
2.
off the appliance. When the coolfunction is switched off, let the fan run for 5 minutes, to dry the
evaporation mat. The cool lightp
blinks. After this overrun time, the appliance and the cooling
indicator switches off.
If there is too little water in the water tank (less than 1/4 of the tank), the pump switches off after 15
4
seconds. After another 5 seconds, the pump switches on again for 15 seconds. If there is still too little
water in the water tank (less than 1/4 of the tank), a warning signal sounds. The pump switches off
and the cooling light goes out.
C L E A N I N G A N D C A R E
V
We recommend cleaning the appliance regularly and at least once a week if using the cool function. To
clean the appliance:
1. Switch off and unplug the appliance.
2. Clean the appliance with a slightly damp cloth.
3. Dry the appliance with a soft, dry cloth.
To clean the air filter:
We recommend cleaning the air filter every two months.
4
Press down the click fingers of the air filter
4.
Clean the air filter
5. with mild detergent and a soft brush.
w
Dry the air filter w.
6.
7. Place back the air filter w.
We recommend the use of a water filter (order no. 700.84) to prevent calcification of the appliance.
4
Please place the water filter in the ice cube compartment of the appliance. The water filter should be
replaced 1 x (for water hardness below 25 fH) or 2 x (for water hardness above 25 fH) per season.
To clean the water tank:
8. Remove the water tank from the appliance.
t
9. Clean the water tank with mild detergent and a soft brush.
t
10. Dry the water tank
with a clean, dry cloth.
t
11. Place back the water tank t.
The honeycomb evaporation mat (art. no.: 770.19) should be replaced depending on the wear and
4
tear, but at least once a year.
R E P L AC I N G T H E B AT T E RY
V
Pull the battery holder out of the remote control 5.
1.
k
2. Insert the battery into the battery holder
k
3. Place back the battery holder into the remote control 5.
k
lights up on and the
p
or the ON/OFF button a, to switch
h
and remove the air filter (see image E).
w
and pay attention to the correct polarity.
33