CORE WDC-215 Bedienungsanleitung Seite 2

EN
Thank you for purchasing the wireless charger WDC-215 by CORE. Before use please
refer to the User's manual, and save it for the future reference. Do not disassemble
the device on your own – all repairs should be done by a service technician. Use only
original parts and accessories provided by the manufacturer. The device should not
be exposed directly to water, moisture, sunlight, fire or other heat sources. We hope
that the product by CORE fulfils your expectations.
Producer
TelForceOne S.A.
ul. Krakowska 119
50-428 Wrocław
Poland
Designed by CORE in EU
Produced in PRC
Specification
Input voltage: 5 V ⎓ 2 A; 9 V ⎓ 2 A
Power: 7,5 W/10 W/15 W
Output: USB-C
Wireless charging distance: ≤ 6 mm
Cable length: 1m
Compatibility: supporting devices with Qi standard
Weight: 115 g
Maximum radiated power for frequency 110 – 205 kHz is - 18,3 dBm EiRP
TelForceOne S.A. declares that the product is compatible with requirements and
other relevant provisions of the 2014/53/UE directive. You can download the decla-
ration of product on the website https://manual.forever.eu
Way of use
To start using the charger, connect it to the power supply source – e.g. smartphone
wall charger, with the USB-C cable. When connected it's ready to use. Make sure
your phone is supporting Qi standard, and place it in the middle of the charging
surface, charging will start automatically. When your device is fully charged, take it
off the charger and unplug it from the power source.
Safety
• Read and keep these instructions.
• Do not remove the device cover. There are no serviceable parts inside. All repairs
should be performed by a service technician.