Monacor CD-112/BT Bedienungsanleitung Seite 11

button STOP . To restart the title sequence,
first press the button PROG, then the but-
ton PLAY/ PAUSE .
Note: A programmed title sequence will be de-
leted when you change the sound carrier, when you
press the button FUNC (19), when you press the
button STOP in the programming mode or when
you switch off the player .
6.8 Operation of the
Bluetooth receiver
The Bluetooth receiver is used for wireless
connection to a Bluetooth signal source (e . g .
notebook, smartphone, tablet PC) . Thus, the
CD-112 / BT will be able to replay the audio
files that have been stored on this source .
Note: The Bluetooth signal source must be com-
patible with the A2DP protocol (Advanced Audio
Distribution Profile); otherwise wireless connection
will not be possible .
1) Enable the Bluetooth function on the
notebook, smartphone or tablet PC (see
manual of the device, if necessary) .
2) To switch on the Bluetooth receiver of the
CD-112 / BT, keep the button BT POWER (15)
pressed briefly until the LED PAIR (12) starts
flashing .
3) To link the CD-112 / BT to the Bluetooth
signal source, keep the button PAIR (13)
pressed briefly until the LED PAIR starts
flashing more slowly . As soon as the wire-
less connection has been established, the
LED PAIR will light permanently .
Note: On the display of the Bluetooth signal
source, the CD-112 / BT is indicated as "Audio
Bluetooth" .
4) Start a title at the Bluetooth signal source .
5) To pause or continue the title, press the
button  I (15) .
Note: As long as the replay is interrupted, the
signal of the CD / MP3 player will be present at
the output PRIORITY (21) .
6) Use the buttons DOWN /  and UP/ 
(20) to go to the previous or next title
(press the button briefly) or for fast for-
ward / reverse (keep the button pressed) .
7) To switch off the Bluetooth receiver, keep
the button BT POWER pressed until the
LED PAIR is extinguished .
All rights reserved by MONACOR
may be reproduced in any form or by any means for any commercial use.
7 Maintenance
Protect the player from dust, vibrations, hu-
midity and heat . For cleaning only use a dry,
soft cloth; never use water or chemicals .
Note concerning sound interruptions and
reading errors
Cigarette smoke and dust will easily penetrate
through all openings of the device and will
also settle on the optics of the laser sampling
system . If this deposit should cause reading
errors and sound interruptions, the device
must be cleaned by skilled personnel . Please
note that there will be a charge on cleaning,
even during the warranty period!
8 Specifications
Frequency range: . . . . . . . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . . . . . . . < 0 .1 %
Channel separation: . . . . . . . > 60 dB
Dynamic range: . . . . . . . . . . . > 96 dB
S / N ratio: . . . . . . . . . . . . . . . > 70 dB
Audio output: . . . . . . . . . . . . 1 .2 V
Bluetooth transmission
Frequency band: . . . . . . . . 2 .4 GHz
max . transmission power: . 10 dBm
Power supply: . . . . . . . . . . . . ~ 230 V / 50 Hz
Power consumption: . . . . . . . 50 VA max .
Ambient temperature: . . . . . 0 – 40 °C
Dimensions
Width: . . . . . . . . . . . . . . . . 482 mm
Height: . . . . . . . . . . . . . . . 44 mm
Depth: . . . . . . . . . . . . . . . . 265 mm
Rack units: . . . . . . . . . . . . . . 1 U
Weight: . . . . . . . . . . . . . . . . 4 kg
Subject to technical modification .
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
11