Blackmagic Design HyperDeck Extreme Control Installations- Und Bedienungsanleitung Seite 1285

Command
goto: timeline: {n}
goto: timeline: +{n}
goto: timeline: -{n}
goto: timecode: {timecode}
goto: timecode: +{timecode}
goto: timecode: -{timecode}
goto: slot id: {n}
jog: timecode: {timecode}
jog: timecode: +{timecode}
jog: timecode: -{timecode}
shuttle: speed: {-5000 to 5000}
remote
remote: enable: {true/false}
remote: override: {true/false}
configuration
configuration: video input:
{SDI/HDMI/component/composite}
configuration: audio input:
{embedded/XLR/RCA}
configuration: file format: {format}
configuration: audio codec: {PCM/AAC}
configuration: timecode input:
{external/embedded/preset/clip}
configuration: timecode output:
{clip/timeline}
configuration: timecode preference:
{default/dropframe/nondropframe}
configuration: timecode preset:
{timecode}
Command Description
goto frame position {n} within timeline
go forward {n} frames within timeline
go backward {n} frames within timeline
goto specified timecode
go forward {timecode} duration
go backward {timecode} duration
goto slot id {n} equivalent to "slot select: slot id: {n}"
jog to timecode
jog forward {timecode} duration
jog backward {timecode} duration
shuttle with speed
query unit remote control state
enable or disable remote control
session override remote control
query configuration settings
change the video input
change the audio input
switch to one of the supported formats:
DNxHR_HQX
QuickTimeDNxHR_HQX
DNxHR_SQ
QuickTimeDNxHR_SQ
DNxHR_LB
QuickTimeDNxHR_LB
QuickTimeProResLT
QuickTimeProRes
QuickTimeProResHQ
H.264Low
H.264Medium
H.264High
H.264High10_422
H.265Low
H.265Medium
H.265High
switch to specific audio codec
change the timecode input
change the timecode output
whether or not to use drop frame timecodes when not otherwise
specified
set the timecode preset
Yazılım Geliştiriciler için Bilgiler 1285