Common mistakes:
Charging the battery
The solar module in the lamp head charges the
integrated battery. Please position the path and
garden lamp so that it is always exposed to suffi-
cient direct light so that the battery is sufficiently
charged during the day via the solar module in the
lamp head.
Note autumn-winter
On cloudy days and in bad weather conditions,
such as heavy cloud cover, snow or even cold, the
lithium battery cannot be fully charged during the
day; the lamp then has a limited light output.
Setting up the path and garden light
You can mount the path and garden light in the
ground with the spike or permanently on a solid
surface with the two enclosed dowels and screws.
To attach the lamp with skewer, push the enclosed
skewer firmly into the lower opening of the rod of
the path and garden lamp. When placing the lamp,
please ensure that the ground provides sufficient
support for the spike.
For mounting on solid ground, appropriately large
holes must be pre-drilled for the dowels.
The orientation of the motion detector sensor must
always be in the direction of a possible appro-
aching movement.