Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use Kennwort to enter the WPA encryption code of your WLAN
router. Check whether the blue WLAN status LED flashes rapidly: If
not so, push the switching key for approx. 5 sec. The red LED briefly
lights up and the blue LED flashes rapidly.
Afterwards tap Konfiguration starten.
Wait until the configuration com-
pletes - this can take up to 30 sec.
After successful configuration the
start screen appears. The smart
control e-plug is now connected to
your WLAN router and you can
switch the device via the app.
Tap the plug symbol to switch on the smart control e-plug.
Afterwards tap the lamp symbol.
Tap the on/off button: the button lights green and the current consumption
value of the connected deivice is displayed.
Technical data
Supply voltage
230 V/AC/ 50 Hz
Nominal current
16 A
Max. switching capacity 3500 W
Degree of protection
IP20
WiFi frequency
2.412 - 2.463 GHz
WiFi safety
WPA-PSK,WPA2-PSk,WEP,TKIp
WiFi standard
IEEE 802.11b/g/n
Dimensions (w x h x d)
56 x 98 x 48 mm (without SCHUKO plug)
Weight
145 g
Bedienungsanleitung
stabo smart control e-plug
Errors and technical modifications reserved, pictures may vary.
Copyright © 02 / 2017 stabo Elektronik GmbH
stabo Elektronik GmbH . Münchewiese 14 -16 . 31137 Hildesheim / Germany
Tel. +49 (0) 5121-76 20 - 0 . Fax: +49 (0) 5121- 51 29 79
Internet: www.stabo.de . E-Mail: info@stabo.de
User Manual
Werbung
