Top Panel - HEADRUSH PRIME Schnellstartanleitung

Features

Top Panel

10
9
11
6
5
4
6
5
4
1. Main Display: This full-color multi-touch display shows information relevant to HeadRush Prime's current
operation. Touch the display (and use the hardware controls) to control the interface. See
learn how it works.
2. Parameter Knobs: Turn these knobs to adjust the parameters or settings shown next to them in the main
display.
3. Encoder: Turn this encoder to scroll through the available menu options or adjust the parameter values of the
selected field in the display. Push the encoder to confirm your selection.
4. Footswitches: Press these footswitches to activate or deactivate the assigned block or scene, or to load the
assigned rig.
5. Footswitch Displays: These display strips indicate the block, rig, or scene assigned to each footswitch.
6. Footswitch Indicators: These lights indicate whether the block, rig, or scene assigned to each footswitch is on
(brightly lit) or off (dimly lit).
7. Expression Pedal: Use this pedal to adjust the assigned parameter/parameters. See the User Guide for more
information.
8. Expression Pedal Status: These small LEDs indicate the current status of the expression pedal.
9. Main Volume: Turn this knob to adjust the volume level of the Outputs.
10. Phones Volume: Turn this knob to adjust the volume level of the Phones Output.
11. Aux Volume: Turn this knob to adjust the volume level of the Aux Input.
Important: The audio signal from the aux input is routed directly to the outputs of HeadRush Prime without any
modeling or effects applied and cannot be used by the looper. It is also unaffected by the main volume or
phones volume knobs.
3
1
8
2
2
2
7
Basic Operation to
3