Maintenance And Care; Taking Out Of Service, Disposal; Taking Out Of Service; Disposal - KLEIBER KNG 4 Betriebsanleitung

8 Maintenance and Care

CAUTION:
Humidity can lead to the destruction of the electrical and electronic components!
Do not use any liquids for cleaning the power supply or cleaning the immediate of the power supply!
IMPORTANT:
The servicing period depends particularly on the operating and environmental conditions and is there-
fore to be specified by the operator!
The power supply is largely maintenance-free.
In the case of excessive malfunction, please contact the technical customer service (contact address see
Service address (section 3.2) at page 3).
Check the cables and the housing at regular intervals for damage and a firm seating.

9 Taking out of service, Disposal

9.1 Taking out of service

DANGER:
Removing electrically live cables risks injury and damage to equipment.
Never remove electrically live connecting cables. Before removing a cable, ensure that the power
supply has been switched off.
Take the power supply out of operation as follows:
1. Switch off the power supply.
2. Remove the connection cables.
The power supply is thus out of operation.

9.2 Disposal

For disposal, you can return the power supply to KLEIBER Infrared GmbH (for address
see Service address (section 3.2) at page 3, WEEE-Reg.-Nr. DE 23400844). For this
you should pack the power supply appropriately in the original packaging or use a card-
board carton with shock absorbing PE material.
KNG 4
REFERENCE TO ENVIRONMENTAL PROTECTION:
Do not dispose of the power supply with domestic refuse!
9 Taking out of service, Disposal
6