Basic Information; Notes For The User Manual; Document Structure And Symbols; Warranty And Liability - KLEIBER KNG 4 Betriebsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

1 Basic Information

Please read this manual carefully, step by step, before using the power supply. For operation of the instrument

this manual is an important source of information and work of reference. To avoid handling errors keep this

manual in a location where you always have access to it.

In addition to this manual, the manuals of the components used are valid. All notes - especially safety notes -

are to be considered.

Operating instructions to be performed in sequence are numbered in chronological order. They are grouped

together in operational units and accompanied by the corresponding results.

Listings without a sequential order are presented as bullet points and items in sub-lists are preceded by

dashes.

Safety precautions are shown with pictograms and key words. They provide information about the type,

source and consequences of the hazard, and safety precautions. The meanings of the pictograms and key

words are explained in Safety (section 2) at page 2.

KLEIBER Infrared GmbH offers a 2 year warranty for the device starting from the date of invoice. The warranty

covers manufacturing defects. Then the device will be repaired free of charge, however freight charges are

the responsibility of the respective sender.

KLEIBER Infrared GmbH reserves the right to exchange the equipment or parts of the instrument instead of a

repair. After a repair, KLEIBER Infrared GmbH offers a warranty of 12 months on all repaired and/or exchanged

instrument components.

Deviations from the proper use described in this user manual will result in restricted warranty and liability or

the loss in case of damage. Damage to wearing parts (e.g. fuses) is excluded from the guarantee.

Warranty and liability claims for personal injuries and/or material damage are excluded if this or these result

from one or more of the following causes:

• Improper use of the device

• Inappropriate operation and servicing of the device

• Unauthorized modiﬁcations to the device without prior consultation with KLEIBER Infrared GmbH

• Rough, mechanical actions or deliberate destruction of the device

• Connection error (overvoltage)

• Frost damage by not observing the permitted environmental conditions and/or by inappropriate storage

• Malfunctions that are caused by non-conformance to this user manual

KNG 4

Inhaltsverzeichnis