Shell Terra AC Schnellinstallationsanleitung Seite 5

6 . Login using the credentials provided by Shell Recharge.
a . Enter the PIN code printed on the 'Terra AC EVSE Indicators Status' fl yer.
b . Press 'Update' to check for available updates.
c . Connect the charge point to the Shell Recharge backoffi ce.
d . Press 'Settings', and confi gure the maximum current limit of the charge
point as 'User Settable Max Current'.
e . Select 'Enable External Cards'.
7 . Verify that the charge point is connected to the Shell Recharge
backoffi ce using the Installer app.
8 . Apply the sticker with the PIN code of the provided 'Terra AC EVSE Indicator
status' fl yer to the inside of the charge point cover, so that it is always
available when the charge points needs to be re-confi gured.
NOTICE
Instruct the customer that they are not supposed to
use the ChargerSync app.
NOTICE
Instruct the customer that the provided RFID card
cannot be used.
NOTICE
Do not hand over the 'Terra AC EVSE Indicator
status' fl yer to the customer.
Explanation of the charge point lights
The charge point is powered and booted.
Authorisation accepted
An electric vehicle is connected, but not charging
The charge point is waiting for authorisation by the user
The charge point is in an error state
Quick Installation Guide – Terra AC - TACSRQIC01
NO. 123456
5