How To Make Coffee - FlyTek ZIP Betriebs- Und Wartungsanleitung

Lift the lever of the machine (ref. F) upwards as indicated in fig.1 and insert the pod as indicated in fig. 2.
C
FOR THE FIRST POURING: insert a pod in the appropriate seat (ref. H) and delicately lower the lever until
the mechanical stop clicks. Place a cup under the spout and press the pouring switch (ref. D); after about
5 seconds the coffee starts pouring. Once reached the desired level in the cup press the pouring switch
again to stop the pouring of the coffee. If, during pouring, the heating light (ref. C) turns off, this simply
means that the machine is heating up to bring the water to the optimal temperature; the pouring can then
safely continue. Once the coffee is poured, we recommend removing the pod to prevent it from sticking,
when it dries. However, it is recommended to wait for the above-mentioned light (ref. C) to be on before
making the next coffee.
FOR ALL THE FOLLOWING CUPS OF COFFEE: proceed as above.
It is important to empty the drip tray (ref. A) after the pouring of not more than 20 cups of coffee.

HOW TO MAKE COFFEE

D
H
F
Do not insert fingers inside the pod insertion seat (ref. H): hazard of crushing
and/or burns!
If the tray is not emptied, the water can overflow
C
D
H
15