Cleaning & Storage; Cleaning The Water Tank; Helpful Information - ProBreeze PB-10 Bedienungsanleitung

DO NOT remove the float from the top of the water tank as this may cause damage and prevent
the dehumidifier from functioning as intended.
NOTE: If the water tank is full or not inserted correctly, the Water Tank Full Indicator Light will flash
and the appliance will turn off.
CLEANING & STORAGE
― ―
WARNING: ALWAYS TURN THE APPLIANCE OFF AND UNPLUG
THE POWER CORD FROM THE ELECTRICAL OUTLET BEFORE
HANDLING OR CLEANING IT.
CAUTION: DO NOT ALLOW WATER OR OTHER LIQUIDS TO
RUN INTO THE INTERIOR OF THE APPLIANCE, AS THIS COULD
CREATE A FIRE AND/OR ELECTRICAL HAZARD.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS CAN DAMAGE THE APPLIANCE.
Do not attempt to clean the appliance in any other way
•
than that detailed by the manufacturer.
Clean the exterior surface of the appliance by wiping
•
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
The filter should be cleaned every two weeks using a
•
damp cloth
Always empty the water tank, clean and dry the
•
appliance when not in use to prevent mould.

Cleaning the water tank:

Remove and empty the water tank as per the instructions
•
above.
10 of 88 | English
Clean the water tank with warm tap water and mild
•
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
Ensure to remove any scale or deposits that have formed
•
inside the water tank.
Wipe all surfaces dry before placing the water tank back
•
into the appliance.
Storage:
To store your product, we recommend using the original
•
or a similar-sized box.
Store the appliance in a safe, clean and dry place, away
•
from direct sunlight and out of reach of children when
not in use.

HELPFUL INFORMATION

― ―
After turning the dehumidifier off using the Power Button, the fan will continue to run for two
minutes. This is a normal operating mechanism and helps to cool down and protect the internal
components of the dehumidifier. DO NOT remove the plug from the socket at any point within the
period whilst the fan is running. Once the fan has stopped running it is safe to remove the plug
from the socket.
When the dehumidifier is first turned on and intermittently thereafter a faint smell may be
noticeable. This is NOT an indication that the dehumidifier is faulty or of any harm to those
nearby but is caused by the Zeolite desiccant material within the body.
Zeolite absorbs odours from items such as cigarettes and cosmetics and when heated
discharges these odours into the room. Ventilate the room if required to reduce the odour. The
odour will reduce naturally as the dehumidifier operates.
The normal operating temperature range is 1°C - 40°C. Should the temperature fluctuate from
this range the dehumidifier will stop operation. This is NOT an indication that the dehumidifier is
broken. Once the temperature returns to within the normal operating range the dehumidifier will
operate as normal.
If the Check Indicator Light is continuously flashing it is an indication of possible overheating. As
a first resolution check the dehumidifier to ensure that it is not covered, the air inlet and air outlet
are not blocked, and the filter is clean. If the Check Indicator Light continues to flash DO NOT
attempt to repair the dehumidifier yourself, as doing so could lead to the risk of electric shock.
English | 11 of 88