SSANGYONG C250 Benutzerhandbuch Seite 13

Operating the Camera Mode
Operating the Front View Camera Mode
This system is equipped with a Front View camera for user safety
through a wider range of vision.
Pressing the Front Camera button on the steering wheel while the vehicle speed
is less than 20km per hour will convert the system to Front View camera mode
and provide the front view through the monitor. The mode is converted regardless
of your current mode except when you are currently in Rear View camera mode.
When the gear is placed in Reverse, the system will automatically convert to Rear
View camera mode.
Once the vehicle speed exceeds 20km per hour, Front View Camera mode will
turn off automatically and the previous mode is restored.
1. Press the Front Camera button to start Front View camera mode.
2. Press the Front camera button again to end Front View camera mode
and restore the previous mode.
CAUTION!
- Cameras are equipped with an optical lens to provide a wider range of vision and may appear different from the actual distance. For safety, directly check the front/rear and
left/right sides.
- When operating the Front and Rear view camera modes, only the volume and incoming call features are supported.
- Strong direct sunlight that enters the camera lens may affect the video quality.
- Video quality may be poor in dark area or at night.
- Colors shown through the monitor may differ from actual colors.
12
Operating the Rear View Camera Mode
This system is equipped with a Rear View camera for user safety through
a wider rear range of vision.
When the gear is placed in Reverse, the Rear View camera mode will operate
regardless of your current mode and display the rear view through the monitor.
When the gear is placed in a different gear, Rear View camera mode will turn off
and the previous mode is restored.
Even when the device is off, placing the gear in Reverse will automatically turn
the device on and start Rear View camera mode.
When reversing, the volume and mute features can be used to improve aware-
ness of your neighboring environment.
1. Place the ignition switch to ON or IGN position.
2. When the gear is placed in Reverse, the Rear View camera mode will
operate.