User Manual - SBS Twin Pure Drops Gebrauchsanleitung

UK
INSTRUCTION MANUAL
Charging the earbud
Insert the earbuds into charging case.
Charging the case
Plug the Type C connector into the TyPE C port of the case and
the other end into a USB port.
The LED on the case will display different accordingly to the
charging status
The LED on the case will off when charging is complete.
≤ 20% shows red light
20% to 80% show blue light
> 80% show green light
Turning on the earbuds
Open the charging case cover, they will automatically turn on
and pair with each other
Or Press both touch area on the earbuds for 3 seconds.
Turning off the earbuds
When you put the earbuds into the charging case and close the
charging case cover,they will turn off automatically.
If TWS are not connected, they will automatically turn off after
5 minutes
Pairing with devices
1. Put the earbuds into the charging case, close the charging
case cover, and then open the charging case cover again: they
will turn on and pair will each other automatically or Long
touch the touch area of the earbud for 3 seconds and the
earbud will automatically power on.
After a few seconds, the earbud is paired successfully.
2. Open the BLUETOOTH settings of the device and search for
"TWS Pure Drops" in the list of available devices
3. After the first pairing with the device (if BLUETOOTH is on), the
earbuds will automatically pair every time.
Reset (A)
Put the earbuds into the charging case, open the cover of the
charging case ,then press the reset button for 6 seconds until
the charging case indicator flashes white light for 3 sec.
4