Quick Start Guide: R-150 - Avalla R-45 Bedienungsanleitung

Quick start guide: R-150

Parts guide
Make sure your purifier is switched off and unplugged from
the mains power supply. Open the air filter cover, remove all
packaging from the new filter, and insert.
Re-attach the air filter cover and reset the filter timer.
Power - Press to turn the unit on / off.
Fan speed / Filter reset – Press to select your preferred fan
speed. The options are low, medium or high.
When the filter needs to be replaced, the PM2.5 icon will flash.
Replace filter then press and hold Fan speed button for 3
seconds to reset. Normal Sleep function will resume.
Timer – Press to select how many hours until you would like
the air purifier to automatically turn off. If no timer indicator
light is on, the timer is disabled.
Ion - Enables negative ion feature.
Sleep mode – Sleep mode will use the quietest fan speed and
switch off the display. Tap any button to wake.
UVC - Press to enable / disable the UVC function.
Auto mode - In auto, the fan speed will adjust automatically
depending on the air quality.
06
Touch control panel
En