Avalla R-45 Bedienungsanleitung Seite 11

as supplementary insulation is applied to the basic insulation to
protect against electric shock in the event of failure of the basic
insulation.
Important: If using an extension lead, follow the instructions that
came with your lead regarding maximum load while cable is
wound. If in doubt, ensure that the entire cable is unwound. Using a
coiled extension lead will generate heat which could melt the lead
and cause a fire.
Failure to abide by any of these warnings could result in a fire,
explosion, electric shock, injury, death, and property damage.
Specifications
Power
CADR 70m3/Hr
Coverage
Max noise <48dB
Min noise <32dB
Troubleshooting
Issue
The unit does not
operate
Excessive noise
The unit powered
off
Avalla Ltd. Unit A 73, Common Road, Chandler's Ford,
En
R-45 R-90
11W 42W
130m3/Hr
18m2 34m2
<50dB
<32dB
Cause identification
Is the filter replacement
light on?
Has the protective cover
been removed from the
filter?
Is the unit positioned on flat
ground?
Was the unit turned on for
48 hours?
Eastleigh, SO53 1HE. United Kingdom
Company no. 13477899
support@avalla.com
R-120 R-150
50W 50W
200m3/Hr 300m3/Hr
52m2 78m2
<50dB <50dB
<35dB <35dB
Solution
Replace the filter
Remove the filter protective
cover
Place the unit on flat, firm
ground
After 48 hours of
continuous use, the unit will
automatically power down
for safety
R-190
35W
400m3/Hr
104m2
<55dB
<37dB
11