Remote Control: Replacing The Battery; Buttons On The Remote Control - Reflexion DVD1052 Bedienungsanleitung

REMOTE CONTROL: REPLACING THE BATTERY

When using the unit for the first time, pull out the transparent plastic battery transport lock
at the bottom of the remote control.
1. Slide the lower left corner (1) to the right.
2. Then pull out the battery holder (2) and remove the old battery from the battery tray
and insert the new battery. Make sure that the polarity is correct when inserting the
battery. The + side of the battery points upwards.
3. Now push the battery slide back into the remote control (3).
Note:

Remove the battery from the remote control during storage or prolonged non-use
of the DVD player.

BUTTONS ON THE REMOTE CONTROL

OPEN
1
2
1. SOURCE: DVD / CARD / USB
2. MUTE: Mute Sound
3. 0-9 ZIFFERN TASTEN: Select the TV channels
4. DISPLAY: Displays the playing time and status
information
5. 10+ Taste: To select a track that is ranked 10
or higher, as an example: you want to select
track 12, then press the 10+ button and then
the 2, you quickly select track 12.
6. MENU / PBC: Open the DVD main menu
(DVD). Switch PBC on/off (VCD).
7. AUDIO: DVD: Press the audio key to select a
different language or audio track, if available.
MP3 / CD / VCD: Press the audio key to listen
to different channels. (Left, Right, Mix,
Stereo).
8. PLAY/PAUSE (
button once to pause playback and a second
time to restart it.
9. STOP ( ): If you press the STOP button once,
playback is interrupted. You can continue
playback at that point by pressing the Play
button. Press the STOP button twice in
succession to delete the playback point.
10. MODE Adjusts the screen setting (brightness,
contrast and saturation).
11. VOL+ Turns up the volume.
12. Selects the next title or chapter.
23
3
): Press the PLAY/PAUSE