Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
1. Voice assistant button
2. Aux port (3.5 mm)
3. USB Micro-B charging port
4. Microphone
5. Power On/Off/Play/Pause/Answer Call/End
Call/Connect Bluetooth
6. LED status indicator
7. Previous song/decrease volume
8. Next song/increase volume
Charge
This product has a built-in rechargeable battery. Before
using it the first time, we recommend that you charge it
fully (About 2 hours). Use the included Micro USB cable
to charge. Connect the USB Micro-B connector to the
headset and the other end to a USB power source with
5V, such as a USB power adapter, or a computer.
LED status
LED is lit red = charging
LED is lit blue = fully charged
LED flashes alternatively blue and red = ready for
connection
LED flashes blue every 5 seconds = connected
Power button functions
Press and hold the power button for about 5 seconds to
turn the headset on or off.
Press the power button to Play/Pause/Answer call/End
call.
Press and hold the power button for 2 seconds to reject
a call.
Press the power button 2 times to redial last number.
Connect
Turn the headset off.
Press and hold the power button for 5 seconds to enter
pairing mode. (From power off)
From your Bluetooth device, connect with the headset.
If a password is requested, use the default: 0000.
The headphone will automatically connect to the last
connected device.
Use your device to disconnect the headset.
Connect via Aux port
Connect the 3.5 mm cable to the Aux port of the headset.
Connect the other end to an audio device.
The headset is turned on automatically when it is in Aux
mode and the control buttons are disabled.You can only
change volume from you audio device.
Volume up/down
Short press on "+" to increase volume or "-" to decrease
volume.
Next/Previous song
Press and hold "+" for next or "-" for previous song.
Voice assistant button
Press the voice assistant button to activate your voice
assistant, such as Siri or Google Assistant.
An indication tone should be heard before you can speak
to the headset.
Requirements for voice assistant button functionality is
that you have a voice assistant installed on your device,
that it has been set as the default voice assistant and
your device must be connected to the headset via
Bluetooth.
5
Werbung
