Miditech Pianobox mini II Benutzerhandbuch Seite 13

2. Turn the big knob and adjust.
Pianobox mini II allow you to adjust sound effects through the

connected MIDI device
Pianobox mini II
Connect
device. Refer to your MIDI device's instruction for detailed operations.
When you adjust on your device volume / tone / reverb / pan / vibrato, the
Pianobox mini II
display on
 Two MIDI devices connecting to the Pianobox mini II
1 . Connect the two MIDI devices to
respectively.
2. The two MIDI devices must be set in different channels.( select the channel
through the MIDI device )
3. Press any key on one of the devices and adjust on
tone and the effect you want. Similarly, set up and adjust the tone and
the effect for another MIDI device. Then the devices are ready to play
simultaneously. ( Tone and effect can be adjusted from the MIDI devices )
Note: With two MIDI devices connected, the display on
shows the setting of the device that is last operated. Make sure what the
active device is before adjust tone and effect.
4. Factory reset: Press and hold preset Button A and C at the same time and
restart the unit. A confirmation message is shown on the display.
the big knob to confirm.
 Display setting
Language / font size setting：Press and hold the big knob for 2 seconds to
enter to the display editor mode，select the language and font size by
pressing the large knob briefly, then turn the big knob to choose the
language and font size
to a MIDI device and adjust it through the
changes accordingly.
Pianobox mini II
13
's MIDI IN and USB Host
Pianobox mini II
the
Pianobox mini II
Press