A.MENARINI GlucoMen Day METER 2K Bedienungsanleitung Seite 6

/ 1.4
The GlucoMen
Glucose / β-Ketone Meter display
2
3
11
1
9
12
13
14
1. Test results: test results displaying panel.
2. Memory recall mode: appears when test results stored in the memory are displayed.
3. PP2 alarm: appears when the post-meal alarm has been set.
4. Bluetooth symbol.
5. Mute symbol
6. Control Solution
saved or displayed.
7. Decimal point: appears when the blood glucose or blood β-ketone measuring
unit is set to mmol/L.
8. mmol/L, mg/dL: unit for measuring blood glucose or blood β-ketone.
9. Alarm: appears when the time alarm has been set.
10. Battery symbol: indicates meter battery is running low and needs to be replaced.
11. Blood insertion
drop of blood or control solution.
12. Pre-meal test
13. Post-meal test
14. Fasting test flag: used for tests done after fasting for at least 8 hours.
15. Month/Day/Hour/Minute.
16. KETONE: appears when GlucoMen
NOTE: It is recommended to check if the display screen on the meter matches
the illustration above every time the meter turns on.
Do not use the meter if the display screen does not exactly match the
illustration as the meter may show incorrect results.
Day METER 2K
®
flag: appears when the control solution test results are
symbol: indicates meter is ready for the application of a
flag: used for tests done before eating.
flag: used for tests done after eating.
Day METER β-Ketone Strips are inserted.
®
English
6
5
4
7
8
16
10
15
6