Herunterladen Inhalt Inhalt Diese Seite drucken

Duration Of The Charging Process; Operation; Lc Display; Testing The Battery - Deuba monzana MZBC04 Anleitung

Vorschau ausblenden Andere Handbücher für monzana MZBC04:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• DANGER! Never modify the mains cable or plug – if it does not fit into the mains socket, have
a qualified technician install a suitable mains socket. Improper connection may lead to electric
shock. This battery charger is intended for operation on a 230 V mains supply system.

5.7 DURATION OF THE CHARGING PROCESS

• The following instructions allow you to determine the charging time for a specific battery.
• Test the battery's state of charge with a hydrometer or an electronic battery tester.
• Determine the battery's capacity by ampere hours or reserve capacity. If these values are not
indicated on the battery, contact your local battery dealer to obtain this information. These are
the only values that can be used to determine the duration of the charging process.
• Insert the battery capacity, the battery state of charge and the ampere setting to be selected
on the charger into the formula below.
Battery's ampere-hour capacity x Percent of the
Ampere setting selected on the charger
• If the battery capacity is specified as reserve capacity, use the following formula to convert the
reserve capacity to ampere-hours.
Reserve capacity
2
NOTE: The duration of the charging processes is approximate and varies depending on the
battery. Always follow the battery manufacturer's specific charging instructions.

6.0 OPERATION

Familiarise yourself with all the safety and connection instructions before using the charger. Failure
to do so may damage the battery and lead to serious injury or death.

6.1 LC DISPLAY

The LC display indicates the charging function:
6 V motorbike mode
6 V motorbike winter mode
12 V motorbike mode
12 V motorbike winter mode
12 V car mode
12 V car winter mode

6.2 TESTING THE BATTERY

The voltage of charged 12 V batteries can be tested without connecting to a mains socket. To do
this, connect the charger to the battery. The display indicates the battery's voltage.
required charge
+ 15.5 = Ampere-hour capacity
= Number of charging hours
Battery voltage
Error 1
Error 2
FULL
Indication of the state of charge
17
www.DEUBAXXL.de

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

108754

Inhaltsverzeichnis