FITO PRODUCTS CO2-O2 Installations- Und Einrichtungsanleitung Seite 35

Number: Function:
1. Traffic light LED indicator green-yellow-red
2. Status bar, battery and sound
3. CO2 concentration (PPM)
4. Temperature (⁰C or ⁰F)
5. Humidity (%RH)
6. Push buttons
7. History of CO2 concentrations
8. Side of the monitor: Speaker
9. Rear side of the monitor: Adapter connection
10. Rear side of the monitor:: On/Off button
Installation:
•
Remove the mounting bracket by turning the monitor counter clockwise while holding the
mounting bracket in place.
•
Connect the adapter.
•
Set the power button to on
•
The welcome logo appears on the LCD screen
•
The monitor takes 30 seconds to warm up and calibrate itself.
- 35 -