Further Information; Warranty Information - Axis S1048 Mk II Installationsanleitung

AXIS S1032 Mk II
Operating Continous operation: 10°C to
35°C (50°F to 95°F) with no
direct sunlight on the equipment
Note
Storage
–40 °C to 65 °C (–40 °F to 149°F)
with a maximum temperature
gradation of 20 °C per hour
Relative humidity
AXIS S1032 Mk II
Operating
10% to 80% (noncondensing)
Storage
5% to 95% (noncondensing)

Further Information

For the latest version of this document, see www.axis.com
The User Manual is available at www.axis.com
Visit www.axis.com/techsup to check if there is updated firmware available for your network
product. To see the currently installed firmware version, go to Setup > About.
Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials and
guides.

Warranty Information

For information about Axis' product warranty and thereto related information, see
www.axis.com/warranty/
AXIS Camera Station S10 Recorder Series
For information
on supported
expanded operating
temperature range and
configurations, see
support.dell.com/ manuals
AXIS S1048 Mk II
Continuous operation: 10 °C to 35 °C at
10% to 80% relative humidity (RH), with
29 °C max dew point. De-rate maximum
allowable dry bulb temperature at 1
°C/300 m above 950 m (1°F per 550 ft).
Note
For information on supported
expanded operating temperature
range and configurations, see
support.dell.com/ manuals
–40 °C to 65 °C (–40 °F to 149°F) with a
maximum temperature gradation of 20
°C per hour
AXIS S1048 Mk II
10% to 80% (noncondensing)
5% to 95% (noncondensing)
13