Description Of The Modes - Xblitz Master BOX Benutzerhandbuch

04. DESCRIPTION OF THE MODES

1. BT mode
When the device is switched on, Bluetooth mode, which is the default mode
of operation, will automatically turn on. The speaker will confirm the activa-
tion of BT mode with a sound notification.. Before first use, pair the speaker
with the selected device by activating BT connection on the latter and select
XBLITZ MASTER BOX from the list. Successful connection will be confirmed
by an sound notification from the speaker.
To switch to the next song, briefly press the UP button. To switch to the
previous song, briefly press the DOWN button. To increase or decrease the
volume, hold down the UP button or the DOWN button respectively. Briefly
press the MODE button to switch the unit to FM mode.
During a phone call, the speaker will read out the caller's phone number,
then start beeping the incoming call. Briefly press the PLAY/PAUSE button
to answer the call or hold the same button to reject the call. The device is
equipped with a microphone, which allows you to use it as a speakerphone.
2. FM mode
To enter FM mode, briefly press the MODE button. For automatic program-
ming of radio stations, press the PLAY/PAUSE button. The unit will scan the
frequencies in the broadcast band 87.5 - 108 MHz nd will store radio stations
in scanning order. These will be stored in the speaker's memory. To switch
between the preset radio stations, briefly press the UP or DOWN button.
Increasing and decreasing the volume is analogous to BT mode - by holding
down the UP or DOWN buttons.
Note: To improve the quality of radio reception, it is recommended to plug
the supplied USB cable into the micro-USB port on the device.
3. AUX mode
Connect the speaker to another device using the AUX cable supplied. The
device will automatically switch to AUX mode. To switch the speaker to
another mode, use the MODE button or remove the AUX cable (the speaker
will then return to the default BT mode).
4. Playback from external storage media
The device plays .mp3 files from external storage media - USB flash drives
and micro-SD cards. To switch to .mp3 playback, simply insert the selected
storage media into the corresponding slot on the loudspeaker. To switch
between tracks, briefly press the UP or DOWN buttons. A short press on the
PLAY/PAUSE button stops playback from the mass storage.
Note: to avoid the possibility of damaging the mass storage, it is recommen-
7