Hama Freedom Buddy Bedienungsanleitung Seite 6

5. Charging
Fully charge the earphones and the charging box once before using them for the first time .
1 Insert the earphones and connect the charging box
2
Charging procedure for the charging box and earphones
The status LEDs on the charging box (2) light up white during the charging process . After the
charging box is fully charged, the 3 LEDs on the charging box light up white .
It can take up to 2 hours (earphones) or up to 2 hours (charging box) until the batteries are fully
charged .
3
Battery capacity
Charging box
100% - 66%
When battery levels are low (< 10%), the first of the three status LED (2) flashes white .
Earphone
When battery levels are low (< 20%), the status LED (3) on the earphones flashes red every 5
seconds . The announcement "Battery Low" is made once a minute .
The actual battery life will vary depending on how you use the device, the settings and the ambient
temperatures (rechargeable batteries have a limited life) .
Note
If you have not used the product for a few months, it can take up to 15 - 30 minutes until the
status LED (2/3) lights up red during the charging process .
Place the earphones in the charging box . Ensure that
the earphones are inserted into the correct sides, using
the L/R markings as a guide .
Connect the USB-C charging cable included to the
charging socket (7) on the charging box .
Connect the free plug on the USB-C charging cable to a
suitable USB charger . To do this, consult the operating
USB-C
instructions for the USB charger you are using .
2
:00
h
2
:00
h
CHARGING
66% - 33%
m
m
CHARGED
33% - 0%
4