A&D FG-D-CWP Schnellstartanleitung Seite 7

This is lit when the display is held.
This is a function to detect impact to the mass sensor section and to display the
impact level.
Turns on when the connection with the wireless communication receiver is
established.
While the comparator function is being used, the weighing value is compared
using the preset threshold values and the indicator displays the result.
For details on the method of operation and various functions, refer to the [Instruction Manual: FG-CWP
Series] on our website https://www.aandd.jp.
4.2. Operation Keys
Operation key
ON/OFF Key
Shows or hides the display.
SAMPLE Key
Selecting "pcs" as the unit activates individual weight setting mode.
Pressing and holding (for about 2 seconds) activates the comparator threshold
setting mode.
PRINT Key
Outputs the weighing value as data.
Increases the value of the digit flashing when setting.
MODE Key
Switches the weighing unit.
Shifts to the right the digit flashing when making settings.
ZERO Key
Based on the zero point weighed at the time of turning on the display, by pressing
the ZERO key when the weight value is stable within ±2 % of the weighing capacity,
the zero point indicator turns on as soon as the display becomes zero.
TARE Key
The weight of the item on the weighing pan is subtracted as the weight of a
container (tare weight).
EN
Description
7