A&D FG-D-CWP Schnellstartanleitung Seite 5

3. Cautions
3.1. Precautions for Installing the Indicator
DANGER
Ground the scale, so that the user will not be subjected to an electric shock.
To prevent electric shock, do not handle the USB cable with wet hands.
The USB cable is not waterproof. Install the scale in an area where it will not get wet.
Do not install the scale where flammable or corrosive gas is present.
Do not put excessive force on cables.
The scale is heavy. Use caution, as lifting may cause it to fall over.
Use shielded load cell cables.
Please read "Precautions for Installing the Scale" in [Instruction Manual: FG-CWP Series] on the
A&D website (https://www.aandd.jp) for other precautions, cautions as an assembled scale, storag
e and cleaning.
Please read "Installation and Precautions" in [Instruction Manual: FG-D-CWP] on the A&D website
(https://www.aandd.jp) regarding connection of load cells, installation of indicators, function setting
and sensitivity adjustment, etc.
3.2. Load Cell Connection
FG-D-CWP has two connection configurations: the 6-wire configuration and the 4-wire
configuration.
We recommend connecting using the 6-wire configuration for optimum accuracy and stability.
Terminal No.
1
2
3
4
5
6
7
Load cell Cable
Load cell input (-)
Load cell input (+)
Load cell excitation voltage (-)
Sensing input (-)
Sensing input (+)
Load cell excitation voltage (+)
Shield
(A) 6-wire configuration connection
to load cell (recommended)
SIG- Load cell input (-)
SIG+ Load cell input (+)
EXC- Load cell excitation voltage (-)
SEN- Sensing input (-)
SEN+ Sensing input (+)
EXC+ Load cell excitation voltage (+)
SHIELD Shield
EN
Function
5
Cable
Shield
(B) 4-wire configuration
connection to load cell