Hisense RS18N4TCE Bedienungsanleitung Seite 46

UNBIND ALL PAIR APPLIANCE
By activating this function, the
appliance will be removed from all
paired app user accounts.
Step 1: Set the appliance to normal
operation. Touch the Wi-Fi icon for
approximately 3 seconds. You entered
network connection menu when ' -- '
appears in the display.
Step 2: Touch the Fridge key to select
' 8 8 ' within 6 0
Step 3: Touch the Wi-Fi icon to confirm
the selection mode to realize unbinding.
Step 4: After the device is unbound, it
will automatically enter the distribution
network state, the Wi-Fi icon flashes,
and the distribution network time is up
to 5 minutes.
seconds.
Note!
The control panel will light up when
the door is open or you touch any
button.
The light will go off without touching
any button or the doors have been
closed for one minutes.
When the refrigerator is powered
on, all the icons of the control panel
will light up for 3 seconds, and a
buzzer sounds. The Child Lock is off.
And the temperature setting reverts
back to the previous setting.
As the application continues to be
upgraded, please refer to the actual
display interface.
User manual:
Transmitting frequency band(s) and
max allowed transmitting power in the
operating frequency
2040-2483.5MHz,less than or equal
to 20dbm.
This equipment should be installed
and operated with minimum distance
20cm between the radiator & your
body.
16
band(s):