Clock Button; Super Mode - Hisense J1-06 Bedienungsanleitung

Operation instructions
SMART mode (invalid for some models)
What you can do in SMART mode
Your feeling
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.

CLOCK button

You can adjust the real time by pressing CLOCK button, then
using and
CLOCK button again the real time is set.

SUPER mode

SUPER mode is used to start or stop fast cooling or heating. In SUPER
mode, the super indicator
Fast cooling operates at high fan speed, changing the set temperature
automatically to 16°C;Fast heating operates at auto fan speed, changing
the set temperature automatically to 30 °C.
SUPER mode can be set when the appliance is in operation or energized.
In SUPER mode, you can set
If you want to escape from SUPER mode, press SUPER, MODE, FAN,
ON/OFF or SLEEP button, the display will return to the original mode.
Note:
SMART button is not available in SUPER mode.
The Appliance will continue working in SUPER mode , if you don't escape from it by
pressing any of the buttons mentioned above.
Heating is NOT available for cooling only air conditioner.
For the first generation of products, you can't set temperature in super mode, but you
can press TEMPERATURE SETTING button to escape super mode.
button
adjustment procedure
Indoor fan speed alternates among
High, Medium and Low each time this
button is pressed.
FAN
Press it once, the vertical adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
SWING For horizontal airflow direction, please
refer to the previous page for details.
buttons to get the correct time, press
SUPER mode
will display on LCD
temperature, airflow direction or timer.
.
6