Making Corrections During Input; Replay Function; Error Position Display Function; Memory Calculation - Citizen SRP-285N Anweisungshandbuch

Making corrections during input

To delete a character at the cursor, make the character underlined
by using [ ] or [
delete the character.
To replace a character, make the character underlined by using [
or [ ] to move the cursor, and then enter a new entry to replace the
character.
To insert a character, move the cursor to the position of the
character where you want to insert, it will be inserted in the front of
the character after pressing [ 2nd ] [ INS ] and entering a new
character.
(Note) : The blinking cursor "
mode. On the contrary, the blinking cursor is displayed
as " _ " and it means the calculator is in overwrite mode.
To clear all characters, clear all input character by [ CL ] key.

Replay function

This function stores the latest operation executed. After execution
is complete, pressing [
from the beginning or the end. You can continue moving the
cursor by [ ] or [
in overwrite mode, just type over the digit). See Example 1.
The replay function can keep input digits up to 254 characters.
After execution is complete or during entering, you can press
either [ ] or [
or commands for subsequent execution. See Example 2.
(Note) : The replay function isn't cleared even when [ CL ] is
pressed or power is turned off, so contents can be
recalled even after [ CL ] is pressed. However, replay
function is cleared when mode or operation is switched.

Error Position Display Function

When a mathematically illegal calculation is performed, error
position display function will tell you with the cursor where the
error is. Press [
correct entry. You can also clear an error by pressing [ CL ] and
then re-entered the values and expression from the beginning.
See Example 3.

Memory Calculation

Press [ M+ ] to add a result to running memory. Press [ 2nd ] [ M– ]
to subtract the value from running memory. To recall the value in
running memory, press [ MRC ]. To clear running memory, press
[ MRC ] twice. See Example 4.
File name : CBM_SR285,A_HDBSR285T19_English.doc
version : 2010/04/26
] to move the cursor, and then press [ DEL ] to
" means the calculator is in insert
] or [ ] key will display the operation
] to edit it. To delete a digit, press [ DEL ]. ( or,
] to display previous input steps and edit values
] or [ ] to move the cursor and then give it a
E – 6
]