Gecko DEVIALET Bedienungsanleitung Seite 8

STEP 5
Installation should always be carried out by two people.
Place the Reactor on the Gecko, then tighten the screw provided as far as it will go in order to
lock the Reactor on its mount. Attention: The prescribed tightening torque is 44 lb-in.
Attention: If people are going to be walking under the GECKO Reactor, we recommend fixing
the PHANTOM Reactor in place using a steel wire as shown in the image.
— Make sure that you keep hold of the Reactor during the procedure.
— To avoid damaging your Reactor, do not handle it by the speakers.
— Make sure that the Reactor is not plugged in during fitting.
STEP 6
Plug in your Phantom Reactor.
8