Shade Installation; Blade Installation; Light Installation - Noaton 11132WW FORNAX Gebrauchsanweisung

Inhaltsverzeichnis

Verfügbare Sprachen

6.2 SHADE INSTALLATION

Align the protrusion of the cover with the notch of the mounting plate and rotate

clockwise to attach the cover

6.3

INSTALLING THE

BLADES

a) Remove the 6 blade screws from the bottom of the motor.

b) The blades are marked which direction to install them (THIS SIDE UP - this direction

up). Screw the blades to the bottom of the motor (see picture below).

1. Remove the 3 screws from the triangular shaped light bracket. Use the

screws to attach the LED board to the triangular-shaped lamp holder.

2. Connect the connector to the LED module of the luminaire.

3. Fit the shade correctly onto the lamp plate. Then turn it clockwise. Make sure the lamp

shade is tightened.

Once the fan assembly is complete, you can plug in the electricity and start using the

ceiling fan.

Inhaltsverzeichnis