Sulion TONDA Bedienungsanleitung Seite 14

Troubleshooting
Remote control malfunction
1.Make sure all connections are correctly made.
2.Make sure that the remote control contains batteries.
3.Make sure that all switches (main and isolation) are on.
4. Receiver resynchronization and remote control.
The receiver and remote for this fan are paired
at the factory, they do NOT need to be paired
once the fan is installed. Synchronization will
only proceed due to a malfunction of the remote
control. If you have questions before performing the
resynchronization, contact Sulion.
CAVEAT! Before syncing, if you have another ceiling fan
in the same or another room that you don't want to sync,
check that it is turned off at the wall switch, if not; it could
be synced also with the same remote control and once
synced it cannot be unsynchronized.
Blade balancing kit / Balancing problems in fan
operation
Your fan box may include one of the following blade
balancing kits.
If you notice your fan is excessively swinging, you can use
this kit to fix this. You will find the instructions on our website
or in the following QR Code.
14
CIF A28763647 Calle Verano, 51 - 28850 Torrejón de Ardoz - Madrid (ESPAÑA)