Overflow / Error Conditions - Citizen SR-260N Anweisungshandbuch

x < 0 : y = 2n+1, I/n, n is an integer. (n ≠ 0)
but –1 x 10
b Input ： Total of integer, numerator and
a
c
denominator must be within 10 digits
(includes division marks)
Result ： Result displayed as fraction for
integer when integer, numerator and
denominator are less than 1 x 10
nPr, nCr 0 ≤ r ≤ n, n ≤ 9999999999, n, r are integers.
│ x │＜ 1x10
STAT
0 ≤ │Σ x
： n ≠ 0 , S ： n ＞ 1 ,σ： n ＞ 0
x
Range = 1 ~ r, 1 ≤ n ≤ r, 80 ≤ r ≤ 20400
DEC
0 ≤
– 9999999999 ≤ x ≤ – 1 (for negative)
BIN
0 ≤
1000000000
(for negative)
OCT
0 ≤
4000000000
(for negative)
HEX
0 ≤
FDABF41C01
(for negative)

Overflow / Error conditions

A symbol " E " are indicated on the display when any of the following
conditions occur and further calculation becomes impossible. Just
press [ ON/C ] to release those overflow or error indicator and the
subsequent calculation can then be performed.
1) When function calculations are performed with a number exceeding
the input range.
2) When a number is divided by 0.
3) When the [ ( ] key is used more than 15 times in a single
expression.
4) When a result (whether intermediate or final) or accumulated total
in memory exceeds the limit. ( ± 9.999999999 x 10
5) When more than six pending operations.
SR-260N_English_090324.rtf SIZE: 135x75mm
1
100
log | x | < 100
<
y
10
50 100
,│Σ x │＜ 1 x 10
2 100
│＜ 1 x 10 , n, r are integers
x ≤ 9999999999 (for zero or positive)
x ≤ 0111111111 (for zero, positive)
x 1111111111
≤ ≤
x ≤ 3777777777 (for zero or positive)
≤ x ≤ 7777777777
x ≤ 2540BE3FF( for zero or positive)
≤ x ≤ FFFFFFFFFF
99
)
E7
/ SCALE 2:1 / 2009/3/24