PATONA LED Dynamic 43 RC60 Bedienungsanleitung Seite 9

• Rotate the dial to select the desired scene.
• Press the dial to switch between brightness and scenes.
Hint:
There are 43 different scenes to choose from.
» Menu
Various parameters can be controlled with the MENU button.
Presets 1 – 16: Storage locations for individual presets.
DMX 001 – 512: Selection of the channel for DMX consoles (DMX Digital Multiplexed).
Ch 01 – 40: Select the channel to pair with the remote control.
Gr A, B, C: Selection of the group for control with the remote control.
Presets
Parameters such as brightness, color temperature, color and scene settings can be saved.
Creating a preset:
• Press the MENU button.
• Press the dial.
• Select the PRESET item.
• Turn the dial to select the preset number.
• Adjust parameters for CCT, HSI and/or FX.
• Press the MENU button again to create another preset.
Calling up a saved preset:
• Press the MENU button.
• Press the dial.
• Select the preset number of the desired preset.
Viewing the parameters of a saved preset:
• Press the MENU button.
• Press the dial.
• Select the preset number you want.
DMX
You can control the brightness using a DMX console and a USB-A/XLR cable.
• Set the DMX channel to any value between 001 and 512.
• Connect the lamp to a DMX console via USB-A or an XLR-USB-A cable.
• Set the appropriate channel on the console.
Hints:
You can only control the brightness via the DMX console.
You can couple several lamps via AUS-A DMX input/output.
» Forward/rewind
• Basically, values/parameters are selected with the setting wheel. You can also use the forward and
backward buttons to select certain values/parameters more quickly.
• Briefly press the forward or backward button to slowly select values/parameters.
• Press and hold the forward or back button to quickly select values/parameters.
» Display
- 8 -