Sygonix 2390080 Bedienungsanleitung Seite 4

Operating Instructions
Retractable Socket Outlet
Item no: 2390080
1 Intended use
The product is a retractable socket outlet. The number and type of consumers that can be
connected will depend on your model.
The product is retractable and is designed to be flush mounted.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
■
Product
■
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
Risk of electric shock!
This product must only be used in dry, enclosed indoor areas. It must not be-
come damp or wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
Read the operating instructions carefully.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
5.2 Handling
■
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
■
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
4
www.conrad.com/downloads or scan the QR
■
Protect the product from direct sunlight.
5.4 Mains cable
Do not tamper with power supply components. Risk of death by electric shock!
■
Always ensure proper connection.
■
Never use damaged power supply components.
■
Do not modify power supply components.
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an exten-
ded period of time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A dam-
aged mains cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker)
and then carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop com-
missioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
5.5 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.6 Product
■
Do not connect the product in series!
■
Do not operate the product while covered.
■
De-energised only when unplugged.
■
Take special caution when children are around. Children cannot recognize the danger
arising from the incorrect use of electrical devices. There is a risk of a life-threatening
electric shock!
■
Only use in dry rooms.
5.7 Sockets
■
The product is equipped with an enhanced protection against accidental contact. An in-
tegrated mechanism will release the holes of the receptacle only, if the two prongs of a
power plug are inserted into the two holes at once.
6 USB port protection
The USB ports have the following protection: over-current, over-temperature, short circuit.
When triggered the power supply to the port(s) will be interrupted.
Preconditions:
a
Protection mechanism has been triggered.
1. Disconnect the power supply to the socket.
2. Remove the conditions triggering the protection.
3. Reconnect the power supply to the socket
à
The power supply will resume when the condition(s) triggering the protection are re-
moved.
7 Installation
Important:
■
Circular cut-out required for installation: ø60 mm
■
Do not install too close to the edge of the table.
■
There should be ≥90 mm clearance under the table for installation.
■
If the surface material is particle board, place insulating tape to protect the cut-out.
■
See section: 11.3 Dimension drawing.