Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to Use
FBT-200 will test each battery according to the selected actual system
standard and rating marked on the battery, to get the accurate results.
1. Before Test
the engine and all other accessory loads must be OFF during test in order to
have accurate results, Turn on the vehicle headlamps for 2-3 minutes until the
battery voltage drops back to normal value if the battery is just fully charged.
2. Steps
a. The Red(+) Positive Battery clamp is connected to the (+)positive battery
terminal, and the BLACK(-) Negative Battery Clamp is connected to the (-)
negative battery terminal. Ensure that the clamps have a firm, secure grip on
the battery terminals for accurate results.
b. Press the
or
to select the "Battery Type" (specified on the battery
rating label), then press "ENTER" to continue.
C. Press the
or
to select the Correct testing standard (specified on
the battery rating label), then Press "ENTER" to continue.
English
4
Werbung
