Foxsur FBT-200 Benutzerhandbuch Seite 2

Welcome
Thank you for purchasing Battery Tester FBT-200. Please patiently read and
understand this use manual before operating this product. if you have any
questions or issues, please contact our technical support
About
Applying the most advanced conductance testing technology, and the reverse
polarity protection etc., FBT-200 server as a 12V-24V battery tester to provide
technicians with critical information about battery health status, to find battery
and charging problems quickly, easily and accurately.
Package Contents
1. Battery Tester FBT-200
2. User Manual
Compatibility
Please be noted that battery type and CCA values(Cold Cranking Amp)
marked on the battery label, please refer to it before using.
FBT-200 supports the following types.
1. VRLA/GEL/AGM/EFB/STD
2. Regular Flooded
Specifications
Display: 2.7" LCD
Cable reach: 650mm (25.6 inches)
Storage Temperature: -20'C to +70'C (-4'F to 158'F)
Working Temperature: -20'C to +60'C (-4'F to 140'F)
Dimensions(L*W*H): 150*90*35mm(5.9*3.54*1.38 inch)
Weight: 325g(0.72lb)
Important
Use this tester in accordance with there instructions, taking into account

the working conditions and the work to be performed. Use of this tester
for operations different from those intended could result in a hazardous
situation
Before testing, make sure the battery terminals are really clean as

grease and dust could lead to errors in the test results.
Wear eye protection when working around batteries.

Check the insulation layer of the battery clamps is in normal condition(no

damage, bareness or disconnection),in case of the electric shock.
Test in a well-ventilated area. Explosive and toxic gases may be

produced during testing
Keep hair, hands,and clothing as well as tester leads and cords away

from moving blades and belts.
The tester is not a toy. keep it out of the reach of children.

Do Not place the tester near the engine or exhaust pipe to avoid

damaged by high temperatures, when the car engine is running.
Do not smoke, cause sparks, or strike matches near the battery when

testing
Do not remove battery clamps while testing

Do not put the tester into a highly humid, dusty environment.

Do not disassemble the tester, or may cause damage.

English 2