The operation of SmartScale and SmartChord is explained in "10.SmartScale-Mode"
and "11.SmartChord-Mode".
e.KNOB-B
The 8 knobs of the MIDI controller can be assigned twice.
Press the KNOB-B button to select the secondary assignment of the 8 knobs.
f.PAD-B
The 8 pads of the MIDI controller can be assigned twice.
Press the PAD-B button to access the secondary assignment of the 8 pads.
g.PRE (BT+PAD-B)
The MIDI controller has 8 presets. Simultaneously press BT and
PAD-B to switch to preset mode. The presets can be selected via the pads.
h.VEL (KNOB-B+PAD-B)
The velocity sensitivity of the keyboard and the pads can be set in four different
levels.
Press KNOB-B and PAD-B at the same time to enter the velocity mode. The top
row of pads now symbolizes the individual velocity values of the pads, and the
bottom row of pads the touch sensitivity of the keyboard keys.
5.Octaving/transposing
Press OCT+ or OCT- to move the octave range of the keyboard up or down. By
pressing the respective OCT button several times, you can move up to 3 octaves up
or down. The further the octave range is shifted, the faster the respective OCT
button flashes (1 octave - slow flashing / 2 octaves - fast flashing / 3 octaves --
permanently lit). Pressing both OCT buttons at the same time will take you back to
standard tuning.
Press and hold OCT+ (or OCT-) and turn the lower right knob (TRANSPOSE) to
transpose the keyboard in semitone steps.
Pressing both OCT buttons at the same time will take you back to standard tuning.
6. Rotary control
The 8 360° knobs can be freely assigned in your DAW. All 8 knobs can be assigned
twice. In addition, they can be used to set values in Arpeggio mode (see
"7.Arpeggio").
7.Pads
The 8 pads are velocity sensitive and support aftertouch.
The pads can be freely assigned in your DAW. All 8 pads can be assigned twice.
8