Charging The Battery; Rear Panel And Connections; Bluetooth Connection - Classic Cantabile M25-AIR Bedienungsanleitung

Charging the battery

Connect the rear USB-B socket to the USB-A socket of a computer or to a suitable
power supply (USB: DC 5V (min.1000mA)) to charge the integrated battery of the
MIDI controller. The charging indicator next to the rear USB socket lights red during
charging and green when the battery is fully charged.

Rear panel and connections

POWER: The power switch activates the MIDI keyboard.
CHARGE INDICATOR: The charge indicator lights red during charging and green
when the battery is fully charged.
USB-B connector: This connector serves as a USB MIDI interface for connecting to
the USB-A connector of a computer to transmit MIDI data. If there is a cable
connection to your computer, the integrated battery of the MIDI controller will also be
charged.
SUSTAIN jack: Use this jack to connect the MIDI controller to a sustain pedal
(6.3mm mono jack). (Not included)

Bluetooth connection

The M25-AIR can be paired to your Bluetooth-enabled smart device
(tablet/smartphone) via Bluetooth MIDI. To do this, open the Bluetooth menu of your
smart device and click on "Pairing". The M25-AIR automatically sends a pairing
request when switched on (BT button flashes). After successful pairing, the BT
button lights up strongly and permanently. You can also trigger the pairing request
manually by holding the BT button for a few seconds (button flashes). If there is no
Bluetooth connection, the BT button only lights up pale.
ATTENTION: Not all smart devices that have Bluetooth can process Bluetooth MIDI.
Check with the manufacturer of your smart device if necessary.
5