Transport - Ikra IBKH 33-1 Gebrauchsanweisung

de tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking
and work practices are all thought to contribute to the
development of these symptoms. There are measures
that can be taken by the operator to possibly reduce
the effects of vibration:
• Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm.
• After each period of operation, exercise to increase
blood circulation.

TRANSPORT

When transporting the tool by car, it must be positioned
so that it poses no danger, and secured.
Make sure that no petrol escapes during transport. Avoid
STORAGE
Lock the device in a proper place to protect it from
unauthorised use.
After every work stint, clean the machine thoroughly to remo-
ve all dust and debris, and repair or replace any faulty parts.
The appliance must be stored in a dry place and protected
from frost.
During transport and storage of the tool, the blade guard
(chain guard) must be attached.
MAINTENANCE
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insufficient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specified in these Instructions may only
be performed by qualified authorised staff.
DANGER
Switch the engine off and remove the socket plug
before any work on the engine. Wait until all rotating
parts have stopped and the appliance has cooled
down.
Keep the blade protection device on, except when interve-
ning directly on the blade.
Keep hands away from all cutting edges and moving parts.
Fingers can be pulled into cutting carriage and be cut or
crushed.
For safety reasons, only have the cutting blade sharpened,
balanced and mounted by a specialist workshop.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never clean
the machine and its components with solvents, flammable
or toxic liquids. Us only a damp cloth making.
• Take frequent work breaks. Limit the amount of expo-
sure per day.
• Protective gloves available from professional pruning
saw retailers are designed specifically for pruning saw
use which give protection, good grip and also reduce
the effect of handle vibration. These gloves should
comply with EN 381-7 and must be CE marked.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor. imme-
diately discontinue use and see your doctor.
damage and injuries.
During transport and storage of the tool, the blade guard
(chain guard) must be attached.
Let the engine cool down, before you store the device in a
closed room.
DANGER
Never keep the unit with petrol in the tank inside a buil-
ding where petrol vapours could get in contact with open
fire or sparks.
After every work stint, clean the machine thoroughly to
remove all dust and debris, and repair or replace any faulty
parts.
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
The starter rope must be replaced as soon as it shows
signs of wear.
The carburettor has an optimised setting 'ex works' . If any
further adjustments should be required contact your
competent customer service.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
GB EN EN ENGLISH ENGLISH ENGLISH
51