Intended Use - Ideen Welt PS 18 CD Bedienungsanleitung

The PS 18 CD shredder may only be used to shred paper, CDs or credit cards in the
infeed slots provided. The material to be shredded must be dry and must correspond to
the specifications listed in the technical data. Shredding other materials can lead to
injuries (for example, if solid material splinters) or damage to the device (destruction of
the cutting unit, etc.).
Do not shred endless paper documents with this device. Remove all paper clips and
staples before feeding paper into the device.
The device may only be used indoors in dry rooms.
Take the device carefully out of the packaging. Insert the inner collecting basket (for CDs)
in the paper collecting basket. Plug the mains cable into the socket. Please observe the energy
supply specifications on the back of the device in your safety measures.
The socket and the mains connection of the device must be freely accessible for safety
reasons so that the power supply can be disconnected in emergencies.
The sliding switch (REV, FWD CD/Card, AUTO) on the device has the following
functions:
AUTO position: the device is ready for operation.
The device is equipped with microswitches. Shredding operating of the respective
cutting unit starts automatically as soon as paper is fed through the infeed slot.
The device runs forwards and draws the paper in.
-
The device switches off automatically after the shredding cycle.
-
FWD CD/Card position: Insert the individual CD or credit card in the respective infeed slot in
the cutting unit.
Credit card
REV position: The cutting unit runs in reverse. To hold the rest of the paper back, you can
push the sliding switch in the REV position and the cutting unit pushes the paper
back.
Clear key: If paper remains in the cutting mechanism, press the Clear key to start the
motor to shred the residual paper.

Intended use

Starting up
Operation
10
CD